The DSG clutch combines two multi plate clutch packs, one for each half of the gear box. Fitting of the clutch pack requires a number of specialist tools and setup procedures. All work will be carried out using the correct procedures as detailed by the manufacturer. Clutch pack for all DSG transmissions. Includes OEM VW clutch pack assembly, clutch pack cover as well as a new set of circlips. This item is special order and may delay shipping. Cross References and Supersessions: 02E398029A.
General Information about this Transmission can be found in the Wikipedia entry. Additional information can be found in the Official Factory Repair Information and sources such as Bentley Publisher's VW SSP (Self-Study Program 851403) and Bentley Publisher's Audi SSP (Self-Study Program 951403).
Coding
- When replacing this Mechatronic unit, simply copy the coding from the original Auto-Scan and paste it into the New Coding section of the replacement followed by clicking [Do it!].
- If the original Coding is unknown, coding information can be found in the pop-up balloon within the VCDS [Coding-07] function.
Basic Setting
Prerequisites:
- Fluid Temperature 30...100 °C (86...210 °F), see Measuring Blocks, Group 019. (Fluid Level needs to be correct!)
- Selector Lever in P
- Ignition ON
- Engine ON (Idling) for one minute or more
- Brake Pedal operated (hold for the whole procedure)
- Throttle Pedal not operated
- Cruise control is switched OFF
NOTE: Be sure to perform the following steps in the sequence shown, followed by the defined test drive.
[Select]
[02 - Transmission]
[Basic Settings - 04]
Transmission Tolerances (Engaged Calibration)
Group 061
[Go!]
- When you go to Basic Settings 061 and click GO the screen may look like this: Basic Settings 061
- Wait until the numbers quit moving and the trans will quit making noises. Basic Settings switches to On when finished: Basic Settings 061
Wait until Basic Settings has switched to ON and all numbers have stopped moving. This may take one minute.
Transmission Tolerances (Synch. Point. Measurement)
Group 060
[Go!]
- When you go to Basic Settings 060 and click GO the screen may look like this: Basic Settings 060
- Wait until the numbers quit moving and the trans will quit making noises. Basic Settings switches to On when finished: Basic Settings 060
Wait until Basic Settings has switched to ON and all numbers have stopped moving.
Clutch Adaptation
Control Module Software Version < 0800:
Group 062
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Special notes.
- When found in the early software level (0627/0628) (8N) Audi TT:
- Basic Settings group 062 may take several minutes to complete. The final values may report: [18 | 18 | .285 | .24] and Basic Settings will report ON when finished.
- If Basic Settings group 062 reports ERROR:| Group 062| Not | Available try test driving the vehicle and repeating at normal operating temp.
Internal Ref: ST?ID=66725 and E?ID=309867
Control Module Software Version >= 0800 :
Group 067
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Reset Values (Clutch Safety Function)
Group 068
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Reset Values (Pressure Adaptation)
Group 065
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Reset Values (Steering Wheel Paddle Installation)
Group 063
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Reset Values (ESP & Tip Cruise Control Installation)
Group 069
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
[Done, Go Back]
Switch off Ignition, wait 10 Seconds and switch it back on.
[Fault Codes - 02]
Check and clear fault codes after successful test.
[Close Controller, Go Back - 06]
Perform the Defined Test Drive.
Special Procedures
Dsg Clutch Adaptation
Defined Test Drive
Suggested test drive after replacing the mechatronic or successful basic setting.
Prerequisites:
- Fluid Temperature 30...100 °C (86...210 °F), see Measuring Blocks, Group 019.
- Do Not use Cruise Control.
Drive in Tiptronic Mode from stand still up to 6th Gear.
While doing that make sure to drive in Gears 3 or 5 for approx. 5 minutes and also in 4 or 6 for approx. 5 minutes.
The engine speed window for all gears is 1200 - 3500 RPM (for clutch calibration).
Perform one sharp braking followed by a full throttle acceleration (oil return check) while in Drive, Not Tiptronic Mode.
Evaluate creep and starting-off points.
Check for leaks.
NOTE: If the test drive cannot be performed in the recommended way or the necessary time, any remaining adaptations will be performed automatically during normal driving.
Special Notes
- Some modules do not require the use if the [ON/OFF/Next] button. If an Error is displayed after clicking the button, or the Basic Settings status does not switch to On, let the selected group and procedure finish on its own.
- It is normal for the transmission to make noise while the tolerances are adapting. Do not exit or abort the Basic Settings sequence prematurely if you hear clacking noises.
- Customers with TDI's have reported that an RPM range of 2000-2500 rpm is sufficient.
Replacement
Replacement Mechatronic units should be ordered by VIN based on PR Codes to confirm vehicle compatibility.
- Run and save a complete Auto-Scan and save it prior to Mechatronic unit removal. See the Online Manual Auto-Scan.
- Enter the original Coding into the New Coding section of the replacement controller.
- Complete Basic Settings
- Complete the Defined Test Drive
VW/Audi OE:02E398029B
Prior No.:
02E398029
02E398029A
02E398998'>02E398029B
DSG Clutch Repair Kit by Genuine VW
Vehicle Fitment: Audi: A3 2006-13 | A3 Quattro 2006-06 | A3 Quattro 2008-13 | TT 2008-09 | TT Quattro 2004-06 | TT Quattro 2008-11 - Volkswagen: Beetle 2003-06 | Beetle 2012-14 | CC 2010-12 | Eos 2007-11 | Golf 2010-12 | GTI 2006-12 | Jetta 2005-12
eEuroparts.com® carries an extensive catalog of aftermarket, OEM, original, and genuine parts from over 200 manufacturers. We are also constantly updating our Genuine VW parts selection to give you the best possible selection of parts.
If there is anything you cannot find in our catalog please contact us and our knowledgeable customer service team will help you locate the part you need, fast.
Country of Manufacture: Germany
Manufacture Quality: Genuine
Shipping Weight (lbs): 20.550
About Genuine VW
The colossal Volkswagen Group, comprised of Audi AG, Skoda, SEAT, Lamborghini, Bugatti Automobiles, Porsche AG and Bentley Motors (among other automotive and industrial marques) began life in 1937 with the VW Type 1. Intended as affordable transportation for Germany's prewar working class masses the Type 1 ultimately carved out a foothold for VW worldwide as the Beetle. Accepting the torch from the Type 1 were the Golf, Scirocco and Polo, all based on the Audi 50 and enormous successes that defined the form and function of compact cars for the foreseeable future. 1975 saw the introduction of the Golf GTi, another milestone for VW as it created the 'Hot Hatch' segment. Current Offerings from VW implement direct injection, turbocharging, variable valve timing and common rail diesel injection once again bringing class leading performance and fuel economy to the people.
Sometimes advanced, proprietary systems require genuine parts. With a comprehensive inventory of Genuine VW parts and an extensive network of resources eEuroparts.com is able to source parts for your cutting edge MK7 to your classic MK1.
If this is not the exact DSG Clutch Repair Kit you are looking for, or you would like this part in a brand other than Genuine VW, please contact us and one of our customer service experts will help you locate the exact part you need.
Vehicle Fitment & Notes
Click a year range, make, and model below for additional information.
Warranty
Within 30 days of your shipment date, defective parts may be returned for a refund, store credit, or exchange. After 30 days this product is supported by a one (1) year warranty against defect.
After 30 days and up to one (1) year from your shipment date, defective parts may be exchanged for a new part which carries a new one (1) year warranty from date of shipment.
The costs to ship you a new one and ship the defect back to us is not included in this warranty.
After one (1) year eEuroparts.com® will honor any extended manufacturer warranty. No exchange will be offered outside of the manufacturer's warranty process. Parts covered by the manufacturer warranty need to be exchanged through the manufacturer and may take up to 4-6 weeks.
This warranty is inclusive meaning that if it is not specifically stated here it is not covered. Labor to replace the damage part and any consequential damage due to failure of the part are never covered under this warranty.
Delivery & Returns
Delivery Info
eEuroparts.com® proudly offers wholesale prices and fast shipping available on most orders.
Every eEuroparts.com® order is track-able, meaning you'll know exactly where your DSG Clutch Repair Kit is at every step of the shipping process. eEuroparts.com® also displays your Expected Ship Date and transit time in your Cart, making our entire shipping process simple and transparent.
Dsg Clutch Tool
Returns Info
eEuroparts.com® offers a thirty (30) day cash return for all items purchased through eEuroparts.com®. The item must be new and in its original manufacturer packaging to be eligible for a cash refund.
If you would like to return an item or have questions about the process, please contact us and one of our customer service experts will be happy to help.
This information is only a summary. Complete shipping and return policy information can be found in our web site policies.
Dsg Clutch Replacement
Enter the name and email you would like to share this part with
Comments are closed.